General Discussion > Hobbies & Crafts
Mini Wood Lathe
GillE:
--- Quote from: Rik on November 14, 2009, 18:52 ---Do you need steady hands though, Gill. I always find I seem to round the edge, rather than grind a cutting angle. :(
--- End quote ---
We're talking about sharpening tools? There have been whole books written on sharpening because so many people find it difficult. Yet it can be quite simple. The key is to start off with decent quality tools which will hold an edge. The stuff you buy from the DIY sheds are often made from inferior grade materials - it's far better to shop somewhere like Axminster Power Tools, Isaac Lord or Brimarc and look for reputable brands such as Lie Nielsen, Veritas, Trend and so on. Some people question the value of a hand plane which costs £200 when they can buy one from a DIY shed for £12. Yet our forefathers expected to have to pay the equivalent of a week's wages to buy a hand plane, and many of those old planes still work beautifully whereas the modern cheapos often get chucked away after only a couple of attempts.
Grinders like the Tormek are great if you do a lot of woodwork and can justify the expense. The Tormek has a variety of jigs which you can buy to make sure that you maintain the correct angle and can sharpen gouges without turning over edges. It uses a water-cooled sharpening stone at a very low speed so the user has a lot of control over the process and there is practically no danger of over-heating the item being sharpened.
GillE:
--- Quote from: Rik on November 14, 2009, 18:52 ---Like the dog, it makes me want to take up screen printing again.
--- End quote ---
I don't get the canine reference, but I had a bash at silk screen printing once. It must have been almost twenty five years ago and I loved it! I just wonder if people appreciate the skill involved nowadays. For most people, it would be easier now to print a design off their computer and iron it onto a tee shirt.
Simon:
Rik just meant he liked the spaniel portrait, Gill. :)
I have tried those iron on transfers, but the trouble is, they iron off again too! :blush:
Rik:
--- Quote from: GillE on November 14, 2009, 21:03 ---We're talking about sharpening tools? There have been whole books written on sharpening because so many people find it difficult. Yet it can be quite simple. The key is to start off with decent quality tools which will hold an edge. The stuff you buy from the DIY sheds are often made from inferior grade materials - it's far better to shop somewhere like Axminster Power Tools, Isaac Lord or Brimarc and look for reputable brands such as Lie Nielsen, Veritas, Trend and so on. Some people question the value of a hand plane which costs £200 when they can buy one from a DIY shed for £12. Yet our forefathers expected to have to pay the equivalent of a week's wages to buy a hand plane, and many of those old planes still work beautifully whereas the modern cheapos often get chucked away after only a couple of attempts.
Grinders like the Tormek are great if you do a lot of woodwork and can justify the expense. The Tormek has a variety of jigs which you can buy to make sure that you maintain the correct angle and can sharpen gouges without turning over edges. It uses a water-cooled sharpening stone at a very low speed so the user has a lot of control over the process and there is practically no danger of over-heating the item being sharpened.
--- End quote ---
I'm a great believer in buying the best tools you can afford, they really make a difference. Same in the kitchen, we recently replaced the pans with Le Creuset tri-ply and the knives with Global. The latter are a joy to use, they cut so well. I'd also recommend Donald Russell's stake knives and carving set - their blades take a wonderful edge.
Rik:
--- Quote from: GillE on November 14, 2009, 21:10 ---I don't get the canine reference, but I had a bash at silk screen printing once. It must have been almost twenty five years ago and I loved it! I just wonder if people appreciate the skill involved nowadays. For most people, it would be easier now to print a design off their computer and iron it onto a tee shirt.
--- End quote ---
The design of the spaniel cut out just made me think of a stencil.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version