PC Pals Forum

Technical Help & Discussion => Self Building, Upgrading & General Hardware Help => Topic started by: Messiahhenry on March 15, 2003, 21:08

Title: Wires from my case to my motherboard
Post by: Messiahhenry on March 15, 2003, 21:08

Ive attepted to build my oqn pc for the first time and everting was going smoothly until ... I reached the wires that come out of the front the speaker wires power etc lights. Could anyone help me and tell me where they go. I left the wires out and tryed to turn on my computer but the power didnt start any ideas?

Title: Re:Wires from my case to my motherboard
Post by: Adept on March 15, 2003, 21:15

Hi Messiahhenry, you should have some documentation with your motherboard that will tell you where all of the connectors go.

Each motherboard is different ::)

Title: Re:Wires from my case to my motherboard
Post by: bat69 on March 15, 2003, 21:17

Hi Messiahhenry

Could you let us know what motherboard you have, make and model ... and the colours of the wires, and if the plugs have anything printed on them

Title: Re:Wires from my case to my motherboard
Post by: Messiahhenry on March 15, 2003, 21:22

can you go online on msn and ill talk to you through that

Title: Re:Wires from my case to my motherboard
Post by: Marshall 73 on March 15, 2003, 22:15

right, there sohuld be 4 sets of wires:

Leds
Reset
Turn On
Speaker

But some cards have more, but that is another question

U will have to look at the mother card buklet to find out, as said above, all cards are different